Niles Audio RS 5s User Manual download pdf (Page 17)

7. Turn the loudspeaker over and feed the other end of the aircraft cable through

the eyelet in the bottom of the loudspeaker.

8. Loop this end of the aircraft cable around the eyelet and back to the aircraft

cable. Secure this end of the cable to the main aircraft cable with the wire rope

clamp. The upgraded attachment should now look like Figure 14.

Final Adjustments

Now that the loudspeaker’s phase, operation and security is assured, there are some

final steps to ensure that the loudspeakers installation is complete and that they are

used at there full potential.

1. Cover any trenches or wires that are still open or exposed.

2. Point the loudspeakers per the layout and verify that the sound is even and

consistent throughout the area that sound is desired, as you did in step 5 of

verifying system operation.

3. Verify that the front of the loudspeaker is as close to perpendicular to the ground

as possible. This will aid the drainage of water away from the woofer and

improve sound quality.

4. Check that the entire installation is safe and secure.

INSTALLATION

Figure 14 Upgraded Security Attachment

Concrete

Anchor

Wire Rope Clamps

Eyelet

Rock Speaker

Aircraft Cable

1 2 ... 12 13 14 15 16 17 18 19 20

No comments

Niles Audio RS 5s User Manual Page 17