Niles-audio SYSTEMS INTEGRATION AMPLIFIER SI-275 User Manual download pdf (Page 13)

INSTALLATION

Speaker Wire Connections

CAUTION! All speaker wire connections must be made with the amplifier Off.

Bare Wire

Unscrew the red or

black plastic knob,

insert the bare wire

end into the opening,

and then tighten the

knob until the wire is

securely clamped.

Banana Plugs

There are many types

of banana plugs, some

crimp, some solder.

The Niles gold banana

plug has a quick-con-

nect binding post for

the bare wire on the

body of the plug. A

banana plug is simply

inserted into the jack

at the end of the ampli-

fier’s binding post.

Dual banana plugs

will fit the SI-275 bind-

ing posts.

STEP

1. Label all wires.

2. Connect one stripped wire end or

banana plug to the black terminal

and one to the red terminal.

CAUTION- Avoid even a single strand

of wire touching the chassis or another

connector.

DESCRIPTION

If you label the wires for their destination,

rather than which terminal of the SI-275 they

are connected to, it will be easier to recon-

figure your system in the future.

A. Split the speaker wire insulation so that

at least two inches of each conductor are

separated.

B. Strip one half inch of insulation from the

end of each conductor of the speaker wire

C. Attach banana plugs or twist the strands of

wire together and insert them into the appro-

priate binding post.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Niles-audio SYSTEMS INTEGRATION AMPLIFIER SI-275 User Manual Page 13

Comments to this Manuals

Related products and manuals for Home Theater Systems Niles-audio SYSTEMS INTEGRATION AMPLIFIER SI-275